Drywall Installation Cost in Greenville SC: 2024 Pricing Guide

By Ryan Mitchell, Owner · Published May 10, 2024
Drywall Installation Cost in Greenville SC: 2024 Pricing Guide

Per-square-foot averages

Drywall installation pricing in Greenville SC is one of the most-asked questions we get every week. Whether you're budgeting for a new build, an addition, a garage finish, or a full remodel, knowing what fair pricing looks like in 2024 can save you thousands and help you separate honest bids from lowballs.

What drives price up or down

As of 2024, most residential drywall installation in the Greenville and Upstate area runs $1.50 to $3.00 per finished square foot — that's wall area, not floor area. The lower end of that range reflects straightforward new construction (8-foot ceilings, standard 1/2" board, Level 4 finish). The upper end covers two-story foyers, vaulted ceilings, Level 5 skim-coated walls, and any project with difficult access or high cuts. Outside the range usually means something is wrong with the bid.

Materials cost breakdown

Several factors drive your project up or down within that range. Ceiling height is the biggest single variable — anything over 9 feet typically adds 15–25% because of staging requirements and slower hang speed. Board thickness matters: 5/8" Type X is required for garages and some other locations and runs about 20% more in material than standard 1/2". Finish level is the other big lever; a Level 5 finish for great rooms with raking light can run $0.75–$1.25 per square foot more than Level 4.

Labor cost breakdown

Materials typically account for about 35–45% of a Greenville drywall installation cost. A standard 4x8 sheet of 1/2" drywall runs $14–$18 in the Upstate at the time of writing, with 5/8" Type X around $18–$22. Add in joint compound, tape, screws, corner bead, primer, and dust control, and a typical 2,500 square foot house consumes about $2,800–$3,500 in materials.

Sample project pricing

Labor is the rest. Hanging drywall on standard 8-foot walls runs about $0.40–$0.60 per square foot of board, with finishing adding another $0.70–$1.20 per square foot depending on the level. Texturing, prime, and cleanup round out the labor. A typical 2,500 square foot Greenville new build runs $8,500–$13,500 total installed, all-in.

Sample pricing for common Greenville projects: a 400 sq ft garage finish typically runs $1,800–$2,800; a 600 sq ft basement finish runs $2,500–$3,800; a 250 sq ft bedroom addition runs $1,400–$2,200. These are install-only numbers — paint, electrical, and trim are extra.

When you get bids, look for itemized labor and material costs, a clear finish level specification, and a defined inclusion list (does it include screws? primer? texture? cleanup?). Drywall Greenville provides itemized written estimates within 24 hours of any free in-home consultation — call (864) 555-0100 to schedule.

Need help with your Greenville drywall project?

Free on-site estimate · written quote in 24 hours · 1-year warranty.

Call (864) 555-0100

Ready for a Free Drywall Quote?

Free on-site estimate · Written quote in 24 hours · No pressure.

Call (864) 555-0100
Call Now